Aggregate Testing Equipment

Product Details:

For determination of particle shape Flakiness Index Elongation of Aggregates are suitable only for hand sieving. These are made using aluminium frames and stainless steel rods of 5 mm dia. and comply fully with EN933-3:1997. Make Lab test size slot width 50.0, 40.0, 31.5, 25.0, 20.0, 16.0, 12.5, 10.0, 8.00, 6.30, 5.00, 4.00, 3.15, and 2.50 mm (set of 14 pcs).

Product Details:

We are the manufacturer of Sample Splitter. Designed for the reduction of test samples which are too large in volume to be conveniently handled. It handles any material from Sand sizes up to dia. 108 mm. Each Chute bar is 12 mm wide so that openings of 12-24-36-48-60-72-84-96-108 mm are possible. Supplied complete with two collecting pans. Very sturdily constructed, it is totally Cadmium Plated for rust protection.

Product Details:

For the rapid preparation of samples, i.e. division into two representative portions. Detailed below is a range of dividers, each constructed of heavy gauge sheet metal with particular attention given to reinforcement of the partition to maintain the accuracy of the slot dimensions. Used for Sampling Aggregates, Ores, Refractory.

Product Details:

We are the manufacturer of Jaw Crusher.

Features:

• Compact and rugged for laboratory and small production units
• Designed for speed crushing
• Manganese steel jaws adjustable up to 6 mm opening
• 250 kg materials can be crushed in approx eight hours
• Supported with strong steel frame

Product Details:

It Determines Bulk Density or unit weight of aggregates. It consists of a Calibrated Cylindrical Measures of sheet iron with handles. Complete with One Tamping Rod ZI 5008 both ends rounded.

Product Details:

It is robustly designed to determine the aggregate impact value(AIV) of aggregates which provides a relative measure of the resistance of an aggregate to sudden shock or impact. The counter fitted to the machine automatically records the number of blows delivered to the sample, manufactured from heavy duty plated steel to resist corrosion. The instrument consists of a circular base with Two vertical guides. The Hammer of weight 13.75 +/-0.25kg can be raised to fall freely down the vertical guides. The Height of fall can be adjusted through 380 +/- 5mm. The Hammer is provided with a locking arrangement.The hammer falls freely to the base and is removable for employing. Supplied complete with metal measure 75mm dia x50mm high (For specimen preparation) and Tamping Rod 230mm long x10mm diameter. A Blow Counter to count the number of strokes is fitted on top of the equipment.

Product Details:

For Measuring of Resistance of Aggregate to Crushing. The Aggregate Crushing Value (ACV) test set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Each set consists of steel cylinder, plunger, base plate, cylindrical measure and tamping rod. All parts of the apparatus are powder coated or galvanized steel, heat treated and ground before manufacturing to make it durable and reliable. Consists of M.S. Cylindrical Container with base plate. A Plunger Supplied complete with Tamping Rod, both ends rounded, 1 no. Metal Measure 115+/- 0.5mmdia x 180 +/- 0.5mm high.

Note:

• On Special Request Aggregate Crushing Value Apparatus having75mm dia or 300mm dia cylinder size can be supplied.

Product Details:

Used for the measurement of surface friction properties, the apparatus is suitable for both site and laboratory applications and for polished stone value tests using curved specimens from accelerated polishing tests. 

The equipment is supplied with:

• Additional scale for tests on polished stone value specimens
• 6 rubber sliders for site use, complete with conformity certificate
• 1 litre washing bottle, for surface wetting
• Tool set with case, for machine assembly
• Rule for sliding length verification

Product Details:

owing to the vast acquaintance, our firm is competent to present bosch in-line diesel fuel injection pump part.  our customers can avail this product as per their requirements.

tag:

petrol fuel injection pump diesel inline  dealer in madurai, petrol fuel injection pump diesel inline  supplier in madurai, petrol fuel injection pump diesel inline  distributor in madurai, petrol fuel injection pump diesel inline  manufacturer in madurai, petrol fuel injection pump diesel inline  price in madurai, petrol fuel injection pump diesel inline  in madurai, petrol fuel injection pump diesel inline  in tamilnadu, petrol fuel injection pump diesel inline  in india, sokkia price in tamilnadu,

 

petrol fuel injection pump diesel inline  supplier in chennai, petrol fuel injection pump diesel inline  dealer in chennai, petrol fuel injection pump diesel inline  distributor in chennai, petrol fuel injection pump diesel inline  service in chennai, petrol fuel injection pump diesel inline  dealer, petrol fuel injection pump diesel inline  supplier

petrol fuel injection pump diesel inline  manufacture in tamilnadu, petrol fuel injection pump diesel inline  manufacture in chennai, petrol fuel injection pump diesel inline  manufacture in kanchipuram, petrol fuel injection pump diesel inline  manufacture in tiruvallur, petrol fuel injection pump diesel inline  manufacture in cuddalore, petrol fuel injection pump diesel inline  manufacture in villupuram, petrol fuel injection pump diesel inline  manufacture in vellore, petrol fuel injection pump diesel inline  manufacture in tiruvannamalai, petrol fuel injection pump diesel inline  manufacture in salem, petrol fuel injection pump diesel inline  manufacture in namakkal, petrol fuel injection pump diesel inline  manufacture in dharmapuri, petrol fuel injection pump diesel inline  manufacture in erode, petrol fuel injection pump diesel inline  manufacture in coimbatore, petrol fuel injection pump diesel inline  manufacture in the nilgiris, petrol fuel injection pump diesel inline  manufacture in thanjavur, petrol fuel injection pump diesel inline  manufacture in nagapattinam, petrol fuel injection pump diesel inline  manufacture in tiruvarur, petrol fuel injection pump diesel inline  manufacture in tiruchirappalli, petrol fuel injection pump diesel inline  manufacture in karur, petrol fuel injection pump diesel inline  manufacture in perambalur, petrol fuel injection pump diesel inline  manufacture in pudukkottai, petrol fuel injection pump diesel inline  manufacture in madurai, petrol fuel injection pump diesel inline  manufacture in theni, petrol fuel injection pump diesel inline  manufacture in dindigul, petrol fuel injection pump diesel inline  manufacture in ramanathapuram, petrol fuel injection pump diesel inline  manufacture in virudhunagar, petrol fuel injection pump diesel inline  manufacture in sivagangai, petrol fuel injection pump diesel inline  manufacture in tirunelveli, petrol fuel injection pump diesel inline  manufacture in thoothukkudi, petrol fuel injection pump diesel inline  manufacture in kanniyakumari, petrol fuel injection pump diesel inline  manufacture in krishnagiri, petrol fuel injection pump diesel inline  manufacture in ariyalur, petrol fuel injection pump diesel inline  manufacture in tiruppur.

 

 

Product Details:

The machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy reduction gear. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test. Complete with Abrasive Charge consisting of a set of Twelve hardened steel balls. Used for testing Crushed Rock, Crushed Slag, Crushed and Uncrushed Gravel For Resistance to Abrasion.

Product Details:

The machine consists of an electronic control unit and a rolled steel drum having an inside diameter of 711 mm and internal length of 508 mm. The internal shelf provided with the machine conforms to ASTM, AASHTO and EN standards. The machine is equipped with an automatic counter, when the preset revolution count is reached, the machine will stop automatically. The drum is equipped with an interlock device which allows the operator to lock the drum into position for easy loading/unloading of the sample.

Product Details:

We are the manufacturer of Tile Abrasion Testing Machine. This is used for determination of resistance to wear for Cement Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counter is Re-adjustable. On request machine to operate on 230 V A.C. Supply can also be supplied.

Product Details:

We are the manufacturer of Tile Abrasion Testing Machine. This is used for determination of resistance to wear for Cement Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counter is Re-adjustable. On request machine to operate on 230 V A.C. Supply can also be supplied.

Product Details:

The buoyancy balance system consists of a rigid support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance. The balance supplied may also be used as a standard weighing device, thus providing a versatile and comprehensive weighing system in the laboratory.

The outfit comprises of:

• Electronic balance, capacity 5 kg.
• Least Count 1 No. 0.1gm
• provision is made in this balance to suspend density basket under material pan.
• This balance is mounted on an angle iron frame stand.
• Density basket. - 1 No.
• Air tight container to suspend density basket. - 1 No.
• GI Tray of area not less than 650 cm sq. - 1 No.
• Absorbent cloths 75cm x 45cm. - 2 Nos.

Product Details:

For The Determination of Resistance of Aggregates to Wear by Abrasion. It consists of two hollow cylinders closed at one end and provided with Fitting covers at the either end. These cylinders are mounted an a shaft at angle of 300 with the axis of rotation of the shaft. The shaft rotates at 30-33 RPM. Through a reduction gear operated by a motor and is provided with a revolution counter. Complete with Abrasive Charge consisting of 12 Nos. Hardened steel Balls of48mm dia. 

Note:

• Option of Digital Preset Counter can be provided at an Extra Cost

Product Details:

For Density Tests on Aggregates as per Procedure Laid Down. Made of Brass / GI with Stainless steel Wire Mesh Ruggedly Constructed. Complete with Handle.

Note: 

• Customize sizes also available

Product Details:

Consists of a hardwood base with vertically mounted metal studs as Specified in the IS 2386 (Part-1) BS 812.

Product Details:

Used for determining the Flakiness Index of Aggregates. It Consists of a frame with a sliding panel. The Panel has slots of Different Standard Lengths and Widths accurately Cut.

Product Details:

Features:

• Designed for grinding materials to produce fine mesh samples Ideal for use in Cement and Chemical Industries
• Self contained grinder with a rotating disc having planetary movement in vertical plane
• Reduces about 450g quartz type material to 100 mesh in one minute
• Material of grinding wheel: High Carbon Steel having 53-60 HRC hardness