MKP Equipments
MKP Equipments
Mattuthavai, Madurai, Tamil Nadu
GST No. 33AVTPM1866A2ZJ
TrustSEAL Verified
Call 08048969864 74% Response Rate
SEND EMAIL

Bitumen & Highways Equipment

Our product range includes a wide range of dial gauge, skid resistance tester, sieves shaker, non contact infrared thermometer, concrete thermometer and ennore standard sand.

Dial Gauge

Dial Gauge
  • Dial Gauge
Get Best Quote
Approx. Price: Rs 2,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandBaker
MaterialSteel
Meter TypeAnalog
ShapeRound

Used for taking measuring settlement of soil, used as flow meter in Marshall stability test to measure deformities, strains, displacements in general. Available Models: (a) 0.01 X 25mm (b) 0.002 X 5mm (c) 0.01 X 50mm
Request
Callback


Additional Information:

  • Delivery Time: immediate
  • Packaging Details: cotton box
Yes! I am Interested

Skid Resistance Tester

Skid Resistance Tester
  • Skid Resistance Tester
Get Best Quote
Approx. Price: Rs 1.35 Lakh / PieceGet Latest Price

Product Details:

Usage/ApplicationIndustrial
Country of OriginMade in India

Pendulum Skid Resistance TesterThe device measures the frictional resistance between a rubber slider mounted on the end of a pendulum arm and the surface to be tested. This provides road engineers with a method of checking the resistance of wet and dry surfaces to slipping and skidding, both in the lab and in situ.
Request
Callback
Yes! I am Interested

Sieves Shaker

Sieves Shaker
  • Sieves Shaker
  • Sieves Shaker
  • Sieves Shaker
Get Best Quote
Approx. Price: Rs 25,000 / PieceGet Latest Price

Product Details:

Voltage230
Country of OriginMade in India

Carries upto 7 sieves of 200mm or 300m, 450mm diameter. The shaker is driven by a 

H.P. Motor through a reduction gear immersed in oil. The sieve table does not rotate but is inclined from the vertical axis and the direction on inclination charges progressively in clockwise direction. If the stop pin below the table is removed, the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder are supplied. The holder can be fixed on the top of the upper most sieve, and thus the sieve set in firmly held. Suitable for operation form 230 V, 50 Hz Single Phase A.C. Supply

we are engagged for Motorized Sieve Shaker in mumbai.

we are engagged for Motorized Sieve Shaker in Coimbatore.

we are engagged for Motorized Sieve Shaker in Madurai.

 

we are engagged for Motorized Sieve Shaker in Chennai.

Request
Callback
Yes! I am Interested

Non Contact Infrared Thermometer

Non Contact Infrared Thermometer
  • Non Contact Infrared Thermometer
Get Best Quote
Approx. Price: Rs 4,500 / PieceGet Latest Price

Product Details:

FeatureHandheld
BrandMKP

We Provide with good quality of Infrared Thermometer.

Features

Non-contact , Clinically validated

  • Measure your forehead/Surface/Room Temp.
  • Instant measurement in 1~2 seconds
  • C / F convertible
Request
Callback
Yes! I am Interested

Concrete Thermometer

Concrete Thermometer
  • Concrete Thermometer
Get Best Quote
Approx. Price: Rs 2,500 / PieceGet Latest Price

Product Details:

Usage/ApplicationLaboratory
BrandTNEI

Usage/Application Temperature Measuring
Color Yellow
Brand TEI
Accuracy 0.5%
Test Position Armpit
Warranty 1 Yea
Request
Callback
Yes! I am Interested

Ennore Standard Sand

Ennore Standard Sand
  • Ennore Standard Sand
Get Best Quote
Approx. Price: Rs 2,100 / BagGet Latest Price

Product Details:

Usage/ApplicationConstruction
Grade1,2,4
Packaging Size25kg
ColorWhite

Product Description. Ennore Sand. Composed of three grades (Grade I, Grade II and Grade III having the sizes 1 mm to 2 mm, 0.5 mm to 1 mm and 0.09 mm to 0.5 mm respectively), each one corresponding to 33.33% weight, was used as fine aggregate in the mortar.
Request
Callback
Yes! I am Interested

Steel Straight Edge

Steel Straight Edge
  • Steel Straight Edge
Get Best Quote
Approx. Price: Rs 4,500 / PieceGet Latest Price

Product Details:

MaterialSteel
Length3 meter
Country of OriginMade in India

Backed by skilled expertise, we are engaged in offering a wide collection of Engineers Steel Straight Edges to our valued clients.  
Request
Callback
Yes! I am Interested

Core Cutting Machine

Core Cutting Machine
  • Core Cutting Machine
Get Best Quote
Approx. Price: Rs 1.2 Lakh / PieceGet Latest Price

Product Details:

Usage/ApplicationRoad Work

Justifying our reputation in this market, we are readily immersed in the arena of offering to our patrons a broad consignment of Core Cutting Machine


Request
Callback
Yes! I am Interested

Marshall Stability Test Apparatus

Marshall Stability Test Apparatus
  • Marshall Stability Test Apparatus
Get Best Quote
Approx. Price: Rs 75,000 / PieceGet Latest Price

Product Details:

Automation GradeManual

Motorized ASTM: D 1559- T -62.Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5 cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely, a) density - voids analysis b) Stability - flow tests. The marshall stability of mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60ºC. The flow value is deformation the marshall test specimen under goes during the loading upto the maximum load, 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.
The apparatus consists of:A loading unit motorized, capacity 5000kgf with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On-off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right.
Request
Callback
Yes! I am Interested

Diamond Core Bit

Diamond Core Bit
  • Diamond Core Bit
Get Best Quote
Approx. Price: Rs 45 / mmGet Latest Price

Product Details:

Usage/ApplicationCore Cutting

Being a leader in the industry, we are engaged in offering a qualitative range of Diamond Core Bits to our customers. 
Request
Callback
Yes! I am Interested

Ductility Testing Machine

Ductility Testing Machine
  • Ductility Testing Machine
Get Best Quote
Approx. Price: Rs 45,000 / PieceGet Latest Price

Product Details:

Automation GradeManual

  • This method is used for determining the ductility of bituminous materials by measuring the elongation before breaking when two ends of a briquette specimen are pulled apart at a speed of 50 mm/min 2.5 mm/min at temperature of 270 C 0.50 C.

Other Details:

  • Stainless steel bath
  • Temperature controller (Thermostatic/Digital)
  • Immersion electric heater
  • Constant speed Pump cum stirrer
  • Carriage holding up to three standard briquette moulds
  • Electric motor with gear mechanism
  • Stainless steel scale and pointer
  • Control Panel

Specifications:

  • The apparatus consists of water bath with a thermostatic heater and a circulating pump to maintain uniform water temperature.
  • One half of the briquette moulds is fixed in a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch.
  • The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the both. A pointer fixed to the carrier moves over. a scale graduated from 0-110 cm x 1mm fixed on the bath with "0" (Zero) of the scale towards the fixed plates side.
  • The rotating shaft has 2 speeds of travel for the bracket, 5 cm/min. and 1cm/min. selected by a clutch. Water bath inside is of Stainless steel with insulation and a water drain. A heater with thermostatic control is fitted. inside the water bath.
  • Control switches for motor, stirrer, heater and indicator lamps are fitted to a control panel located at a convenient place on the water bath. Complete with three briquette moulds and one base plate. Working on 230 Volts, single phase, 50 cycles, AC.

Optional Fittings At Extra Cost:

  • Digital Temperature indicator cum controller (in place of Thermostatic control)
  • Digital display for Elongation
  • The more advanced model with refrigeration system which ensures better temperature control in tropical conditions. The Machine is mounted on a steel stand with refrigeration unit at its base.
  • Base Plate for mould.
  • Mould for elastic recovery.
Note - Price will be change as per specification 
Request
Callback
Yes! I am Interested

Slake Durability Apparatus

Slake Durability Apparatus
  • Slake Durability Apparatus
Get Best Quote
Approx. Price: Rs 95,000 / PieceGet Latest Price

Product Details:

Country of OriginMade in India

Specification: This test method has been developed to assess the deterioration of rocks over a period of time when subjected to water immersion. Slake durability is a simulated weathering test to determine abrasion resistance during wetting and drying cycles of shale and similar soft rocks as used in embankments and other construction-related applications. Samples are alternately tumbled in mesh drums through a water
Request
Callback
Yes! I am Interested

Standard Penetrometer

Standard Penetrometer
  • Standard Penetrometer
Get Best Quote
Approx. Price: Rs 9,000 / PieceGet Latest Price

Product Details:

MaterialMetal

Penetrometer is used for determining the penetration of modified asphalt and highway bitumen. It can further be used for inspecting powders, colloids, granules and glycerin.
Request
Callback
Yes! I am Interested

Buoyancy Balance

Buoyancy Balance
  • Buoyancy Balance
Get Best Quote
Approx. Price: Rs 30,000 / PieceGet Latest Price

Product Details:

Usage/ApplicationSpecific Gravity Test

The Density of Hardened concrete specimens like Cubes & Cylinders can be quickly & accurately checked using Buoyancy Balance. The Buoyancy Balance consists of a rigid support Frame, incorporating a Water Tank ,mounted on a platform.Amechanical lifting device is used to raise the Water Tank thru the Frame height immersing the specimen suspended below the balance .The Balance supplied may also be used as a standard weighing system in the laboratory.
Request
Callback
Yes! I am Interested

Rolling Thin Film Oven

Rolling Thin Film Oven
  • Rolling Thin Film Oven
Get Best Quote
Approx. Price: Rs 80,000 / PieceGet Latest Price

Product Details:

Usage/ApplicationLaboratory
ShapeRectangular
Country of OriginMade in India

The Rolling Thin-Film Oven (RTFO) procedure provides simulated short term aged asphalt binder for physical property testing. Asphalt binder is exposed to elevated temperatures to simulate manufacturing and placement ageing. The RTFO also provides a quantitative measure of the volatiles lost during the ageing process.
Request
Callback
Yes! I am Interested

Camber Board

Camber Board
  • Camber Board
Get Best Quote
Approx. Price: Rs 7,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
MaterialMild Steel

Used to check and maintain the slope of the road as per design. Material:- Aluminium section of size 24 mm x 45 mm of thick gauge. Size: 3 meters long
Request
Callback


Additional Information:

  • Delivery Time: 2 week
  • Packaging Details: cotton box
Yes! I am Interested

Straight Edge

Straight Edge
  • Straight Edge
Get Best Quote
Approx. Price: Rs 4,500 / SetGet Latest Price

Product Details:

Minimum Order Quantity1 Set
Country of OriginMade in India

A straight edge approximately 3 metres in length may be used to determine lateral surface regularity of a road surface. This lightweight apparatus is made up of mild steel and is equally supported at both ends producing a set height between the road surface & the beam. Any vertical irregularity is measured using incremented wedges.
Request
Callback


Additional Information:

  • Delivery Time: 2 week
Yes! I am Interested

Benkelman Beam Apparatus

Benkelman Beam Apparatus
  • Benkelman Beam Apparatus
Get Best Quote
Approx. Price: Rs 25,000 / PieceGet Latest Price

Product Details:

MaterialMetal

Lightweight Aluminum construction, Ease of Transportation, Unique Telescopic Design Simplifying Field set up, Compact, Thereby reducing the amount of storage space needed. Benkelman Beam utilizes the technique of using balanced beam in conjunction with a suitable vehicle to measure road flexure The improved Benkelman Beam is a convenient, accurate device for measuring the deflection of flexible pavements under moving wheel loads. Operating on a simple lever arm principle, the unit consists. Supplied with carrying case.
Note:Benkelman Beam with Digital Dial Gauge also available at an extra cost 
Request
Callback
Yes! I am Interested

Density Kit

Density Kit
  • Density Kit
Get Best Quote
Approx. Price: Rs 4,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Brandmkp
Country of OriginMade in India

Request
Callback
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Product

View All Product


Reach Us
Ananthraj R (Sales Manager)
MKP Equipments
No 4/149, 8th Street, Lake Area, Mattuthavani Bust Stand Back Side
Mattuthavai, Madurai - 625007, Tamil Nadu, India


Call Us


Send E-mail