Cement Testing Equipments

Product Details:

Cement Sampler that can be availed at affordable rates. Procured from our dependable vendors, these cement samplers are basically brass tubes with wooden handle. Lightweight, accurate and durable, these samplers are widely demanded in the market for their consistent performance. 

Other Details:

• This is a brass tube approximately 53cm long and 2.8cm I.D. with a wooden handle.
• The tube has the sharp angular edge which conveniently pierces cement bags.
• An air hole of approximately 3mm dia is drilled on the tube near handle.
• Total sample collected at one time is 300 cm approximately.

Product Details:

Curing is the process of maintaining satisfactory moisture content and temperature in freshly cast concrete for a definite period of time immediately following placement.

Product Details:

One of the primary functions of a drilling fluid is to carry drilled solids from the well bore. These solids are a contaminant, and if left in the system, can lead to numerous problems. The ofite sand content kit determines the volume percent of sand-sized particles in the drilling fluid. Api defines sand-sized particles as any material larger than 74 µm (200-mesh) in size. The test can be performed on low solids fluids as well as on weighted fluids. The kit consists of a glass tube graduated to read percent (%) by volume, a funnel, and a 200-mesh sieve contained in a cylindrical shaped holder. Consists of sand content kit, complete, with sieve, funnel, graduated tube, wash bottle & carrying case.

Features:

• Api Defines Sand-Sized Particles As Any Material Larger Than 74 µm (200-Mesh) In Size
• The Kit Consists Of A Glass Tube Graduated To Read Percent (%) By Volume, A Funnel, and A 200-Mesh Sieve Contained In A Cylindrical Shaped Holder

Sand Content Kit Manufacturer in Chennai, Sand Content Kit Dealer in Chennai, Sand Content Kit Shop in Chennai, Sand Content Kit Supplier in Chennai, Sand Content Kit Price in Chennai

 

 

 

Sand Content Kit Manufacturer in Tamilnadu, Sand Content Kit Manufacturer in Chennai, Sand Content Kit Manufacturer in Kanchipuram, Sand Content Kit Manufacturer in Tiruvallur, Sand Content Kit Manufacturer in Cuddalore, Sand Content Kit Manufacturer in Villupuram, Sand Content Kit Manufacturer in Vellore, Sand Content Kit Manufacturer in Tiruvannamalai, Sand Content Kit Manufacturer in Salem, Sand Content Kit Manufacturer in Namakkal, Sand Content Kit Manufacturer in Dharmapuri, Sand Content Kit Manufacturer in Erode, Sand Content Kit Manufacturer in Coimbatore, Sand Content Kit Manufacturer in The Nilgiris, Sand Content Kit Manufacturer in Thanjavur, Sand Content Kit Manufacturer in Nagapattinam, Sand Content Kit Manufacturer in Tiruvarur, Sand Content Kit Manufacturer in Tiruchirappalli, Sand Content Kit Manufacturer in Karur, Sand Content Kit Manufacturer in Perambalur, Sand Content Kit Manufacturer in Pudukkottai, Sand Content Kit Manufacturer in Madurai, Sand Content Kit Manufacturer in Theni, Sand Content Kit Manufacturer in Dindigul, Sand Content Kit Manufacturer in Ramanathapuram, Sand Content Kit Manufacturer in Virudhunagar, Sand Content Kit Manufacturer in Sivagangai, Sand Content Kit Manufacturer in Tirunelveli, Sand Content Kit Manufacturer in Thoothukkudi, Sand Content Kit Manufacturer in Kanniyakumari, Sand Content Kit Manufacturer in Krishnagiri, Sand Content Kit Manufacturer in Ariyalur, Sand Content Kit Manufacturer in Tiruppur

Additional Information:

• Delivery Time: 2 week

Product Details:

• Size - 15x15x15 cm, Raw Material - Plastic
• Each Cube Mold Has Been Quality Checked And Oiled From Inside To Avoid Rusting Of The Product Even When Not In Use.
• All Four Interior Faces As Well As The Base Plate Has Been Precisely Casted With Distance Between Opposite Faces & Height Of Mold = 150 ± 0.2 mm
• The cube mould is normally made in two halves to facilitate removal of the concrete cube without damage.
• Applications Used For Making Square Blocks Of Cementing Or Sand Material During Construction Works.

Product Details:

• Size - 15x15x15 cm, Raw Material - Plastic
• Each Cube Mold Has Been Quality Checked And Oiled From Inside To Avoid Rusting Of The Product Even When Not In Use.
• All Four Interior Faces As Well As The Base Plate Has Been Precisely Casted With Distance Between Opposite Faces & Height Of Mold = 150 ± 0.2 mm
• The cube mould is normally made in two halves to facilitate removal of the concrete cube without damage.
• Applications Used For Making Square Blocks Of Cementing Or Sand Material During Construction Works.

Product Details:

Useful to determine specific gravity of clays, sand and gravel of size smaller than 10 mm.
Salient Features

• Specifications : Comprises a 1 kg glass jar with brass cone, locking ring and rubber seal.
• Spare: Rubber seal.

Additional Information:

• Delivery Time: immediate
• Packaging Details: cotton box

Product Details:

Flow cone apparatus is used for determining the flow properties of grouts, mortars, muds and other fluid materials.

Product Details:

• 100 Sheets
• Paper Density: 100 gsm
• Paper Size: 125mm
• White Color

Filter Paper   Manufacturer in Chennai, Filter Paper  Dealer in Chennai, Filter Paper  Shop in Chennai, Filter Paper  Supplier in Chennai, Filter Paper  Price in Chennai

 

 

 

Filter Paper  Manufacturer in Tamilnadu,  Filter Paper  Manufacturer in Chennai, Filter Paper  Manufacturer in Kanchipuram,  Filter Paper  Manufacturer in Tiruvallur, Filter Paper  Manufacturer in Cuddalore, Filter Paper Manufacturer in  Villupuram, Filter Paper  Manufacturer in Vellore,  Filter Paper  Manufacturer in Tiruvannamalai, Filter Paper  Manufacturer in Salem,  Filter Paper  Manufacturer in Namakkal, Filter Paper  Manufacturer in Dharmapuri, Filter Paper  Manufacturer in Erode, Filter Paper  Manufacturer in Coimbatore, Filter Paper Manufacturer in The Nilgiris, Filter Paper  Manufacturer in Thanjavur, Filter Paper  Manufacturer in Nagapattinam, Filter Paper  Manufacturer in Tiruvarur,  Filter Paper Manufacturer in Tiruchirappalli, Filter Paper  Manufacturer in Karur, Filter Paper  Manufacturer in Perambalur, Filter Paper  Manufacturer in Pudukkottai, Filter Paper Manufacturer in Madurai, Filter Paper  Manufacturer in Theni, Filter Paper  Manufacturer in Dindigul, Filter Paper  Manufacturer in Ramanathapuram, Filter Paper Manufacturer in Virudhunagar, Filter Paper  Manufacturer in Sivagangai, Filter Paper  Manufacturer in Tirunelveli, Filter Paper  Manufacturer in Thoothukkudi, Filter Paper  Manufacturer in Kanniyakumari, Filter Paper  Manufacturer in Krishnagiri, Filter Paper  Manufacturer in Ariyalur, Filter Paper  Manufacturer in Tiruppur

Product Details:

• Sieve Analysis for gradation of sand & aggregate.
• Measuring Jar for silt content of sand.
• Pycono meter for specific gravity of aggregate.
• Flakiness index for size Aggregate.
• Oven for moister content of aggregate and for moister correction of RMC Plant.
• Slump cone to get the slump of the concrete at RMC Plant.
• Various test also perform on cement for getting its strength, initial and final setting time.
• Cube molds to get the cube of the concrete from RMC Plant.
• Electronic weight Machine for .01 gm and 10 gm accuracy.
• Sieve shaker machine for shaking sieve.

Product Details:

This instrument is used for determining the time setting of hydraulic cement.
Salient Features

• Specifications : A base with a vertical shaft and two horizontal arms. The lower arm is adjustable for height. 1 No. Initial Needle 1/12 inch dia 1/4 lb.wt. 1No. Final Needle 1/12 inch dia. 1lb.wt. 1No. Glass base plate. Complete as above.

Additional Information:

• Delivery Time: 2 week
• Packaging Details: cotton box

Product Details:

This instrument is used for determining the normal consistency and setting times of cement and 'A' class limes.
Salient Features

• Specifications : The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould, split type and glass base plate and one set of needles one each initial needle, final needle and consistency plunger

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

We are well-established name in industry, engaged in manufacturing and supplying optimum quality Paver Vibrating Table that is extensively used in automobile industry. Offered table is manufactured at our advanced manufacturing unit using quality-approved raw materials and ultra-modern machines under the guidance of our experienced professionals. Furthermore, this Paver Vibrating Table is available in various sizes and other related specifications according to the requirements of our clients.

Product Details:

We are well-known organization in the market for manufacturing and supplying Pan Mixer which is highly demanded in market due to its high operational efficiency. It is made using high grade steel material and modern technology which ensures high productivity. This mixer is used in concrete mixing, dry powder mixing and granular mixing. Offered mixer is checked on different quality parameters by our professionals to ensure its rugged design. Pan Mixer can also be availed in different specifications at market leading prices. 

 

Features:

• High reliability
• Less maintenance
• Enhanced service life

Product Details:

Mortar Cube Vibrating Machine is used for vibrating the mix in moulds at a frequency of 12,000 ± 400 cycles per minute. The vibrator is mounted over 4 coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The centre of gravity of the vibrator, including the cube mould, is either at the centre of eccentric shaft or within 25 mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds.

Specifications:

Product Details:

• Rocks Minerals Geology - Geography Project Kits for Kids 8 Years 10 Years: Rocksmins based learning kits for Rocks and Minerals found in India will help your child make a interesting Geography/Geology project about the various Raocks and Minerals and its features and usage.
• Outdoor Exploration cum Learning Toys for Kids Girls Boys: Helps the kid understand mechanisms and improves his soft skills and Gross Motor Skills while keeping the entertainment quotient high. It directs the kid's curiosity to help him learn and explore.
• Project Kit for School – It is innovative, tinkering, Fun learning and our based learning kits and materials. This contains all required materials and Instruction books to help make the project independently.

Product Details:

Tag:

Bitumen Testing Equipment   Dealer in Madurai,     Bitumen Testing Equipment   Supplier in Madurai,     Bitumen Testing Equipment   Distributor in Madurai,     Bitumen Testing Equipment   manufacturer in Madurai,     Bitumen Testing Equipment   Price in Madurai,     Bitumen Testing Equipment   in Madurai,     Bitumen Testing Equipment   in Tamilnadu,  Bitumen Testing Equipment   supplier in Chennai,     Bitumen Testing Equipment   Dealer in Chennai,     Bitumen Testing Equipment   Distributor in Chennai,     Bitumen Testing Equipment   Service in Chennai,     Bitumen Testing Equipment   Dealer,     Bitumen Testing Equipment   Supplier Bitumen Testing Equipment   Manufacture in Tamilnadu,     Bitumen Testing Equipment   Manufacture in Chennai,     Bitumen Testing Equipment   Manufacture in Kanchipuram,     Bitumen Testing Equipment   Manufacture in Tiruvallur,     Bitumen Testing Equipment   Manufacture in Cuddalore,     Bitumen Testing Equipment   Manufacture in Villupuram,     Bitumen Testing Equipment   Manufacture in Vellore,     Bitumen Testing Equipment   Manufacture in Tiruvannamalai,     Bitumen Testing Equipment   Manufacture in Salem,     Bitumen Testing Equipment   Manufacture in Namakkal,     Bitumen Testing Equipment   Manufacture in Dharmapuri,     Bitumen Testing Equipment   Manufacture in Erode,     Bitumen Testing Equipment   Manufacture in Coimbatore,     Bitumen Testing Equipment   Manufacture in The Nilgiris,     Bitumen Testing Equipment   Manufacture in Thanjavur,     Bitumen Testing Equipment   Manufacture in Nagapattinam,     Bitumen Testing Equipment   Manufacture in Tiruvarur,     Bitumen Testing Equipment   Manufacture in Tiruchirappalli,     Bitumen Testing Equipment   Manufacture in Karur,     Bitumen Testing Equipment   Manufacture in Perambalur,     Bitumen Testing Equipment   Manufacture in Pudukkottai,     Bitumen Testing Equipment   Manufacture in Madurai,     Bitumen Testing Equipment   Manufacture in Theni,     Bitumen Testing Equipment   Manufacture in Dindigul,     Bitumen Testing Equipment   Manufacture in Ramanathapuram,     Bitumen Testing Equipment   Manufacture in Virudhunagar,     Bitumen Testing Equipment   Manufacture in Sivagangai,     Bitumen Testing Equipment   Manufacture in Tirunelveli,     Bitumen Testing Equipment   Manufacture in Thoothukkudi,     Bitumen Testing Equipment   Manufacture in Kanniyakumari,     Bitumen Testing Equipment   Manufacture in Krishnagiri,     Bitumen Testing Equipment   Manufacture in Ariyalur,     Bitumen Testing Equipment   Manufacture in Tiruppur

Product Details:

Product Description. Ennore Sand. Composed of three grades (Grade I, Grade II and Grade III having the sizes 1 mm to 2 mm, 0.5 mm to 1 mm and 0.09 mm to 0.5 mm respectively), each one corresponding to 33.33% weight, was used as fine aggregate in the mortar.

Product Details:

Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easy to tilt 1. 1/2 to 2cu.ft.mix. The total drum volume is however 3cu.ft. Mounted on a sturdy rubber tyred stand, and the drum is mounted for end discharge and equipped with end towing pole. Equipped with ½H.p. electric motor. Suitable for operation on 220/230 volts A.C. single phase.

Additional Information:

• Delivery Time: 2 week

Product Details:

The vibrating table is used for compacting concrete cubes and cylinders.
Salient Features

• Specifications : It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied steplessly between a maximum of 3600 vibrations down to 2600 vibrationsper minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor, suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.supply.
  
  Note:Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available.

Additional Information:

• Delivery Time: 2 week

Product Details:

- 24 Hour cycle from time of mixing. - Controlled 35oC or 100oC ±2oC Curing Temperature for concrete. - Controlled 27oC ± 2oC Curing Temperature for grey cement. The tank has been designed to accommodate 150mm/70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The Tank is heated by a immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35oC or 100oC ± 2oC / 27oC +2oC , expect for the 15 minutes after immersion of the freshly made specimens.
Salient Features

• Curing Tank for 6/12 moulds of 150mm / 70.6mm size
• Curing Tank for 12/24 moulds of 150mm / 70.6mm size

Additional Information:

• Delivery Time: 1 week

Product Details:

When conducting traixial tests on soil samples, it is observed that due to internal pressure, the cell expands, soil specimen consolidates resulting in the change of volume. Volume change gauge is therefore deviced to accurately measure volume changes. This is measured by observing the quantity of water entering or leaving the cell as the cell pressure and axial load are changed it is achieved by the displacement of free surface between the water supplied to the cell and another fluid (paraffin or kerosene). A dye is added to the paraffin for clear demarcation of the interface.
The unit consists of a glass graduated tube of the appropriate capacity graduated to parts of a ml. enclosed in a perspex tube sealed by two end caps. The unit is fitted with manifolds and valves which enable it to be used with the triaxial cell and the constant pressure (Mercury controls) system. The cell pressure can either be directly applied to the cell from the constant pressure system or through the volume change gauge. The graduated glass tube is not subjected to any difference in pressure and its inside is coated with a layer of silicon water repellent to reduce the error in meniscus. There is an arrangement for filling the unit with water and paraffin and a drainage valve is provided in the lower end cap. The whole assembly is mounted on a panel suitable for wall mounting. The unit is supplied complete with a pressure hose with end couplings and a packet of dye.
Salient Features

• Single Burette 10ml capacity graduated in 0.05ml division
•  25ml capacity graduated in0.1ml division
• Twin Burette  50ml. capacity graduated in 0.2 ml. divisions. The unit consists of two glass graduated burettes of 50 ml. x 0.2 ml. capacity enclosed in two perspex tubes sealed by two end caps. The manifold with valves enable the flow of fluid in the burettes to be reserved when the paraffin interfaces reach their limits in the burettes, the maximum capacity of measurement being only limited by the capacity of the mercury pots. The two burettes, enable the reduction in error in meniscus reading due to reversal of flow, the average of the two burettes being always taken as the volume change reading.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Capping Set: For correct compressive strength of concrete cylinders, the end surfaces of the specimen must be truly flat. If they are not using capping compound and a capper, the faces are plastered flat. Capping set can be used for cylindrical specimen like concrete cylinders of cores. It can be used in laboratory or in field.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Used for finding specific gravity of hydraulic cement. Made from borosil glass. The flask is 243mm in total height, having a bulb of 90 mm dia of 250ml approximate capacity. The long neck of the flask has at top a funnel of 50mm dia in which fits a ground glass stopper. The neck has over-all 11mm i. D. Upper portion is graduated from 18 ml to 24ml with 0. 1ml graduation. Just at the bottom of the neck 1ml capacity is marked in between there is 17ml capacity bulb.

Additional Information:

• Delivery Time: 1week
• Packaging Details: cotton box

Product Details:

Also called mould vibrator or mortar cube vibrator
Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibration of lesser amplitude to the mould while casting. This is achieved in a vibrating machine. Vibration machine is used for the preparation of mortar cubes for the determination of compression strength of ordinary and rapid hardening portland cement, low heat portland cement, portland bleast furnace cement and high alumina cements.
Salient Features

• Specifications : The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base. The complete frame assembly consists of a vice to hold a 7.06cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould. This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame. A balance weight is an integral bottom part of the frame. The centre of gravity of the assembly is brought to the centre of the eccentric shaft or within a distance of 25mm below it.
• The electric motor drives the shaft of the frame and thus imparts required vibrations to the mould.
• The frequency of vibration is 12000+/-400 vibration per minute. Supplied complete with on 7.06cm cube mould with loose base plate, a time switch 0-5mins x 1min and certificate of vibration from a standard laboratory.
  Spares : Set of Springs, Belt and Belt guard.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

This is for use while casting a cement briquette.
Salient Features

• Specifications : The standard spatula consists of a steel blade, of a special shape. A wooden handle is fixed to the stem of blade. The weight does not exceed 340gms.

Additional Information:

• Delivery Time: 2week
• Packaging Details: cotton box

Product Details:

For the Air Permeability measuring of cement specimen. The testing conforms with the requirements of ASTM C204, BS 4359-2.

Product Details:

Rectangular Heating Plate  Manufacturer in Chennai, Rectangular Heating Plate Dealer in Chennai, Rectangular Heating Plate Shop in Chennai, Rectangular Heating Plate Supplier in Chennai, Rectangular Heating Plate Price in Chennai

 

 

 

Rectangular Heating Plate Manufacturer in Tamilnadu,  Rectangular Heating Plate Manufacturer in Chennai, Rectangular Heating Plate Manufacturer in Kanchipuram,  Rectangular Heating Plate Manufacturer in Tiruvallur, Rectangular Heating Plate Manufacturer in Cuddalore, Rectangular Heating PlateManufacturer in  Villupuram, Rectangular Heating Plate Manufacturer in Vellore,  Rectangular Heating Plate Manufacturer in Tiruvannamalai, Rectangular Heating Plate Manufacturer in Salem,  Rectangular Heating Plate Manufacturer in Namakkal, Rectangular Heating Plate Manufacturer in Dharmapuri, Rectangular Heating Plate Manufacturer in Erode, Rectangular Heating Plate Manufacturer in Coimbatore, Rectangular Heating PlateManufacturer in The Nilgiris, Rectangular Heating Plate Manufacturer in Thanjavur, Rectangular Heating Plate Manufacturer in Nagapattinam, Rectangular Heating Plate Manufacturer in Tiruvarur,  Rectangular Heating PlateManufacturer in Tiruchirappalli, Rectangular Heating Plate Manufacturer in Karur, Rectangular Heating Plate Manufacturer in Perambalur, Rectangular Heating Plate Manufacturer in Pudukkottai, Rectangular Heating PlateManufacturer in Madurai, Rectangular Heating Plate Manufacturer in Theni, Rectangular Heating Plate Manufacturer in Dindigul, Rectangular Heating Plate Manufacturer in Ramanathapuram, Rectangular Heating PlateManufacturer in Virudhunagar, Rectangular Heating Plate Manufacturer in Sivagangai, Rectangular Heating Plate Manufacturer in Tirunelveli, Rectangular Heating Plate Manufacturer in Thoothukkudi, Rectangular Heating Plate Manufacturer in Kanniyakumari, Rectangular Heating Plate Manufacturer in Krishnagiri, Rectangular Heating Plate Manufacturer in Ariyalur, Rectangular Heating Plate Manufacturer in Tiruppur

Additional Information:

• Delivery Time: 2 week

Product Details:

With stainless steel chamber (21 kg/cm.sq. Pressure)
The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions - 10.5 cm diameter x 40.5 cm height suitable for operation on 230 v, 50 Hz, Single Phase, A.C.Supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.

Additional Information:

• Delivery Time: 2 week

Product Details:

Designed to find out specific gravities of semi liquids like mud and other liquids. It has a stainless steel bam calibrated. A stainless steel cup with lid and overflow vent is fitted on one side of the beam. A counter weights with cursor slides over the graduated scale. The beam has a knife-edge at centre which rests in a fulcrum fitted in the stand. Leveling screws and spirit level are fitted to the stand. Supplied complete with wooden box.

Product Details:

The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air permeameter.
Salient Features

• Specifications : The apparatus consists one each of permeability cell 12.5mm I.D., Manometer 'U' type mounted on stand with a built in stop cock, Perforated disc, Plunger Rubber stopper, Rubber tube 30cm long. Packet of 12 filter paper discs and a bottle of 100cc dibutyiphthalate liquid.
  Spares and Accessories:Punch to cut filter paper discs. Non-perforated disc. Suction bulb

Additional Information:

• Delivery Time: 2 week
• Packaging Details: cotton box

Product Details:

Proper compaction of cement concrete while casting specimens for compression testing is essential to achieve higher compressive strength . AIMIL Vibrating Table is ideally suited for this purpose. The table top is suitable to hold cube moulds and has stops along its edges to prevent moulds from sliding off the table during operation. The specially designed vi bro motor for operating the vibrator.

 

Models available:

 

Vibrating Table, Table top 75cm x 75cm for 6 moulds of 150mm cube (AIM 364)

Vibrating Table,Table top 50 x 50cm for 4 moulds of 150mm cube (AIM 365-1)

Vibrating Table,Table top 2m x 1m for 32 moulds of 150mm cube (AIM 366-1)

Vibrating Table,Table top 1m x 1m for 16 moulds of 150mm cube (AIM 367-1)

Product Details:

This is used for determining the workability of building limes.
Salient Features

• Specifications : The flow table consists of a 30cm. dia ground and polished steel plate with three inscribed annular circles. 7, 11 and 19cm. dia. The table top is arranged for a free fall of 12.5mm by a cam action. Supplied complete with one brass conical mould, 65mm I.D. at base and 40mm I.D. at top, height of the mould 90mm

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

This is used for determination of resistance to wear for cement concrete flooring tiles. Tiles specimen of size 7. 06 cm x 7. 06 cm is pressed tace-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding path and after specific number of revolution of the grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose.
the machine consists of a disc rotating at a speed of 30 rpm in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A pre-set counter automatically stops the machine after 22 revolutions. This counter is re-adjustable.
the machine works on 440 volts A. C. , three phase electrical supply.

Additional Information:

• Delivery Time: 2 week

Product Details:

This cone is used to find out viscosity of bentonite slurry and similar material. The marsh cone is 6 inch in diameter at the top and 12 inch long, and tapers to join a tube 2 inch long and 3/16 inch inside dia. Time in seconds required to flow out 1000cc of slurry from cone is measured as funnel viscosity of the material.

Product Details:

Tag:

 Portable Mixers Dealer in Madurai, Portable MixersSupplier in Madurai,Portable Mixers   Distributor in Madurai,Portable Mixersmanufacturer in Madurai,Portable Mixers   Price in Madurai,Portable Mixersin Madurai, Portable Mixersin Tamilnadu,

Portable Mixers   supplier in Chennai, Portable Mixers Dealer in Chennai, Portable Mixers   Distributor in Chennai, Portable MixersService in Chennai, Portable Mixers  Dealer, Portable Mixers   Supplier

 Portable Mixers Manufacture in Tamilnadu, Portable Mixers Manufacture in Chennai, Portable Mixers   Manufacture in Kanchipuram,   Portable Mixers  Manufacture in Tiruvallur,Portable Mixers   Manufacture in Cuddalore, Portable Mixers   Manufacture in Villupuram, Portable Mixers Manufacture in Vellore,  Portable Mixers   Manufacture in Tiruvannamalai,        Portable Mixers   Manufacture in Salem,        Portable Mixers   Manufacture in Namakkal,        Portable Mixers   Manufacture in Dharmapuri,        Portable Mixers   Manufacture in Erode,Portable Mixers  Manufacture in Coimbatore, Portable MixersManufacture in The Nilgiris, Portable Mixers   Manufacture in Thanjavur, Portable Mixers Manufacture in Nagapattinam, Portable Mixers   Manufacture in Tiruvarur, Portable Mixers Manufacture in Tiruchirappalli,   Portable Mixers   Manufacture in Karur, Portable Mixers   Manufacture in Perambalur, Portable MixersManufacture in Pudukkottai, Portable Mixers   Manufacture in Madurai, Portable MixersManufacture in Theni,Portable Mixers   Manufacture in Dindigul, Portable Mixers Manufacture in Ramanathapuram,   Portable Mixers   Manufacture in Virudhunagar,  Portable Mixers   Manufacture in Sivagangai, Portable MixersManufacture in Tirunelveli, Portable Mixers   Manufacture in Thoothukkudi, Portable Mixers   Manufacture in Kanniyakumari, Portable Mixers   Manufacture in Krishnagiri, Portable Mixers   Manufacture in Ariyalur, Portable Mixers   Manufacture in Tiruppur

 

Product Details:

This poking rod is 150 -175mm long and have cross section 12x25mm with tamping face in the form of blunt torpedo.

Product Details:

Used for determining the slump of fine aggregate in the determination of bulk and apparent specific gravity and absorption of fine aggregate.
Salient Features

• Specifications : The equipment comprises of -A conical metal mould 1.5 inch dia at the top, 3.5 inch dia at the base and 2.7/8 inch in height. A metal tamping rod weighing 12 ounces and having a flat circular tamping face 1 inch in diameter.

Additional Information:

• Delivery Time: 2 week
• Packaging Details: cotton box

Product Details:

Specifications : weight approximately 210gm. Best quality with hardwood handle blade length approx. 200mm.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

It is used to measure the drying shrinkage of concrete autoclave expansion of port land cement and potential expansive reactivity of cement aggregate combinations in mortar bars during storage, on self drying.
Salient Features

• Specifications : The instrument consists of a channelled base over which two vertical pillars are fixed. An adjustable cross plate is at the top. A dial gauge, reading to 0.002mm x 12mm. can be fixed to the top cross plate. The plunger end of the dial gauge can be located upon a 6.5mm. dia ball or other reference point cemented in the specimen. On the base there is a similar recessed seating in which can be placed a second ball or reference point in the specimen. Complete with a stainless steel standardization bar with insulated grip and with 6.5mm dia. balls mounted in the ends.
  The unit can be supplied with a 0.0001 inch x 1/2 inch dial gauge at extra cost

Additional Information:

• Delivery Time: 2
• Packaging Details: cotton box

Product Details:

The mould is used for casting specimens of cement aggregate combinations for measuring the potential expansive alkali reactivity.
Salient Features

• Specifications : The mould, which has 25mm x 25mm x 25mm effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box