Sand Test Equipment

Product Details:

Proctor needles are used for quick evaluation of maximum soil density in the field. Standard Compaction curves showing moisture contents versus densities are drawn in laboratory using standard compaction method and penetration of the proctor needles are correlated. Proctor needles are also known as Proctor Penetrometers.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

This instrument is used to estimate approximate unconfined compressive strength and the estimation for shear strength of soil. Cohesive soils can also be classified in terms of consistency using this penetrometer. This is a handy and convenient instrument.
Salient Features

• Specifications : It cosists of a light weight barrel assembly with a polished and ground steel loading piston plunger. A direct reading scale is engraved on the piston barrel and indicates load in kg./sq.cm. A maximum load indicator ring is provided on the penetration plunger. The calibrated spring is heat treated and plated for rust resistance. The barrel diameter is 20 mm and the length 150 mm. Supplied in storage box

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Dynamic cone penetrometer 16-T0012/D includes: 

• 8 kg dropping weight with 575 mm drop  
• 2 penetration tips 60° cone, 20 mm dia.
• drive rod 1 meter long                 
• vertical scale                         
• wrench and carrying case  

All contained in a carrying case.

• Case dimensions:  1200x350x200 mm approx.
• Weight approx.: 30 kg

Product Details:

Augers are used to collect disturbed soil samples at reasonable depths for laboratory tests. Augers are available in two type and each in different sizes. Blade type (post hole type) and Helical type (screw type). Each auger outfit consists one each of Auger head, one meter long rod, Tee piece and handle. Depths of excavating can be increased by using additional extension rods.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Liquid Limit Device

Salient Features

• Specifications :It consists of a brass cup held on an adjustable bracket. The cup can be adjusted for a fall of 1 cm and can be raised and dropped on a rubber base of standard hardness by cam action. Complete with one casegrande grooving tool, one ASTM Grooving tool and a heigh gauge block (Type A of IS 9259)

Taag:Liquid Limit Device Supplier in Chennai , Liquid Limit Device | Liquid Limit Device (With Counter) | Liquid Limit Device (Motorized) |

Liquid Limit Device in Tamilnadu, Liquid Limit Device in Chennai, Liquid Limit Device in Kanchipuram, Liquid Limit Device in Tiruvallur, Liquid Limit Device in Cuddalore, Liquid Limit Device in Villupuram, Liquid Limit Device in Vellore, Liquid Limit Device in Tiruvannamalai, Liquid Limit Device in Salem, Liquid Limit Device in Namakkal, Liquid Limit Device in Dharmapuri, Liquid Limit Device in Erode, Liquid Limit Device in Coimbatore, Liquid Limit Device in The Nilgiris, Liquid Limit Device in Thanjavur, Liquid Limit Device in Nagapattinam, Liquid Limit Device in Tiruvarur, Liquid Limit Device in Tiruchirappalli, Liquid Limit Device in Karur, Liquid Limit Device in Perambalur, Liquid Limit Device in Pudukkottai, Liquid Limit Device in Madurai, Liquid Limit Device in Theni, Liquid Limit Device in Dindigul, Liquid Limit Device in Ramanathapuram, Liquid Limit Device in Virudhunagar, Liquid Limit Device in Sivagangai, Liquid Limit Device in Tirunelveli, Liquid Limit Device in Thoothukkudi, Liquid Limit Device in Kanniyakumari, Liquid Limit Device in Krishnagiri, Liquid Limit Device in Ariyalur, Liquid Limit Device in Tiruppur

Product Details:

It is a fast ,accurate method to derive direct moisture % in a sample by Loss on Heating Method. Heating arrangement consists of a 250 watt heating lamp with a solid state power stat to control rate of drying and also temperature.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Specifications : Same as above but instead of a set of three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm, 75mm bore. 75mm bore tube is provided with overflow arrangement for constant head tests. The remaining tubes are used for falling head test.
Salient Features

• Optional : Overhead tank made of steel, approximately 37.5cm dia x 1mtr. high. it is provided with an inlet port at the top and size outlet at bottom with cocks and air inlet and water filling tube on top. An arrangement is provided to indicate the water level. An extra meralic tube having approximately 5mm /6mm I.D. and 1 mtr. long is also supplied 2.6 kg x 310 mm controlled fall and Rammer 4.89 kg x 450 mm controlled fall.
  
  
• Spares : Pair of top and bottom Porous stones for permeameter mould.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Same as above but fitted with a counter to register the number of blows.

Tag:

Casagrande Liquid Limit Apparatus  Dealer in Madurai,   Casagrande Liquid Limit ApparatusSupplier in Madurai,   Casagrande Liquid Limit ApparatusDistributor in Madurai,   Casagrande Liquid Limit Apparatusmanufacturer in Madurai,   Casagrande Liquid Limit ApparatusPrice in Madurai,   Casagrande Liquid Limit Apparatusin Madurai,   Casagrande Liquid Limit Apparatusin Tamilnadu,   Casagrande Liquid Limit Apparatusin India,

 

Casagrande Liquid Limit Apparatus supplier in Chennai,   Casagrande Liquid Limit ApparatusDealer in Chennai,   Casagrande Liquid Limit ApparatusDistributor in Chennai,   Casagrande Liquid Limit ApparatusService in Chennai,   Casagrande Liquid Limit ApparatusDealer,Casagrande Liquid Limit ApparatusSupplier

Casagrande Liquid Limit Apparatus Manufacture in Tamilnadu,   Casagrande Liquid Limit ApparatusManufacture in Chennai,   Casagrande Liquid Limit Apparatus Manufacture in Kanchipuram,   Casagrande Liquid Limit ApparatusManufacture in Tiruvallur,   Casagrande Liquid Limit Apparatus Manufacture in Cuddalore,   Casagrande Liquid Limit ApparatusManufacture in Villupuram,   Casagrande Liquid Limit ApparatusManufacture in Vellore,   Casagrande Liquid Limit ApparatusManufacture in Tiruvannamalai,   Casagrande Liquid Limit ApparatusManufacture in Salem,   Casagrande Liquid Limit ApparatusManufacture in Namakkal,   Casagrande Liquid Limit ApparatusManufacture in Dharmapuri,   Casagrande Liquid Limit ApparatusManufacture in Erode,   Casagrande Liquid Limit ApparatusManufacture in Coimbatore,   Casagrande Liquid Limit ApparatusManufacture in The Nilgiris,   Casagrande Liquid Limit ApparatusManufacture in Thanjavur,   Casagrande Liquid Limit ApparatusManufacture in Nagapattinam,   Casagrande Liquid Limit ApparatusManufacture in Tiruvarur,   Casagrande Liquid Limit ApparatusManufacture in Tiruchirappalli,   Casagrande Liquid Limit ApparatusManufacture in Karur,   Casagrande Liquid Limit ApparatusManufacture in Perambalur,   Casagrande Liquid Limit ApparatusManufacture in Pudukkottai,   Casagrande Liquid Limit ApparatusManufacture in Madurai,   Casagrande Liquid Limit ApparatusManufacture in Theni,   Casagrande Liquid Limit ApparatusManufacture in Dindigul,   Casagrande Liquid Limit ApparatusManufacture in Ramanathapuram,   Casagrande Liquid Limit ApparatusManufacture in Virudhunagar,   Casagrande Liquid Limit ApparatusManufacture in Sivagangai,   Casagrande Liquid Limit ApparatusManufacture in Tirunelveli,   Casagrande Liquid Limit ApparatusManufacture in Thoothukkudi,   Casagrande Liquid Limit ApparatusManufacture in Kanniyakumari,   Casagrande Liquid Limit ApparatusManufacture in Krishnagiri,   Casagrande Liquid Limit ApparatusManufacture in Ariyalur,   Casagrande Liquid Limit ApparatusManufacture in Tiruppur.

 

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

We are leading manufacturer and exporter of Permeability Apparatus - (PR-01) and our product is made up of good quality.

In soil machines, Permeability is one of the important Engineering properties, as it governs the rate of settlement of saturated compressible soil layer and rate of flow of aquifer.

Permeability is that property of soil which permits flow of water through its interconnecting voids.

The instrument to measure permeability is called permeameter. The results are used for pumping groundwater, for foundation sites excavations, the design of dams etc.

Tests can be performed on remolded or undisturbed samples using the constant head or falling head method.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

It is used in bitumen testing purpose. it consist of cone with 4.8mm dia. bottom hole  & Stand. stand has adjustable knob for setting the cone as per required high. 

Product Details:

It will consist of metallic cone with half angle of 15' -30 ±15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gms. The total rod shall pass through two guides. (to ensure vertical movement) fixed to a stand. Suitable provision will be made for clamping the vertical rod at any desired height above the surface of the paste in the trough. A brass trough 50 mm internal diameter and 50 mm depth will be provided as per IS specification resting on M.S.bars.

Optional Accessories

Ground Glass : 10mm thick and about 45 cm square or larger rough glass as per IS 2720 (Part V-1985) for mixing soil and water
Spatula : Flexible with blade about 8 cm long and 2 cm wide made from stainless steel material as per IS:2720 (part V-1985)
Evaporating dish : Made from porcelain material having diameter of about 12 to 15 cm with smooth surface as per IS 2720 (part V-1985)

Product Details:

IS : 2720 XIV
This equipment is used for the determination of the relative density of cohesion less free draining soils.
The equipment comprises a vibratory table 75mm x 75mm motorized 230 Volts, single phase A.C. cylindrical mould 3000 cm3 and 15000 cm3, guide sleve with clamp for moulds, surcharge base plate, surcharge weight for 3000 and 15000 cm3, handle for base plate, dial gauge holder, dial gauge 0.01 mm x 25 mm travel with extension piece calibration bar 75 x 300 x 3mm.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Tension Compression Proving Rings are having standard 1/2" (BSF Threads) and for measuring tension , 2 nos. Tension rods having male threads at both ends are supplied.
For measuring loads in compression these tension rods are removed and the ring can be used in usual way. Works calibration charts for tension and compression are supplied with each ring . Supplied complete with tension rods in a carrying case.
Note : We can also supply the following Proving Rings. 1. Tension cum compression proving ring upto 10,000kg capacity. 2. Double proving rings.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

This apparatus is used for measuring pore water pressure and pore air pressure in soils. This is as per the principals outlined in the book "Measurement of soil properties in triaxial tests" by A.W.Bishop and D.J.Henkel. This is used as an accessory for triaxial test apparatus.
Salient Features

• Specifications : The apparatus consists of a panel for wall mounting on which are fitted -1.0 to 20 kg/cm2 x 0.1 kg/cm2 a pressure gauge, Bourdon tube type 20 cm dia.
  Manometer: Glass U-tube manometer for measuring low positive pore pressures negative pore pressures and checking zero error of pressure gauge. It is provided with a mercury trap (Mercury supplied at extra cost). Null indicator made out of clear transparent perspex with mercury trap and cursor to indicate the mercury level.
  Burette : 50 ml Burette for measuring the volume change in the soil specimen. Pressure pump fitted with four sleeve packed valves. Operated by mean of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure. Copper coil and water reservoir. The unit is tested against leaks upto 10 kg/cm.sq.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results for those soils which have low plasitcity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm penetrates 25 mm gives the liquid limit.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

This is used for Standard Penetration Test. For determining penetration resistance (N Value) of soil which can be related to unconfined Compressive strength, Penetration resistance (N Value) of soil is determined by giving a number of blows with a 65 kg. weight falling through a given distance of 75 cm required to penetrate the assembly to a depth of 30 cm, when properly seated on the ground.
Salient Features

• Specifications : The sampler is made from a steel tube split lengthwise and held together by a head fitted with a ball check valve and a hardened steel shoe of inside cutting edge of 35 mm dia. The sampler is 35 mm I.D. and 50.8 mm in outer diameter and 508 mm long. One adaptor to connect 'A' type drill rods is also supplied.
  Spares: Body of split spoon sampler, shoe of split spoon sampler, head of split spoon sampler.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

The apparatus is used to determine the workability of Portland cement concrete. The Kelly ball test is considered to be simple and much faster than the slump test. Twice the Kelly ball reading approximately equals the slump.
Salient Features

• Specifications : It consists of a cylinder with a ball-shaped bottom and handle, together weighing 15 kg. A strip frame, guides the handle and serves as a reference for measuring the depth of penetration. The handle is graduated in MM. Penetration can be recorded to the nearest 0.5mm.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

A very useful kit to determine on the spot soil pH value. This is a compact kit easy to carry on site.
Consists of :
12 thick walled test tubes with rubber bungs.
1 tube cleaning brush
1 bottle of barium sulphate (100gm)
1 bottle of soil indicator (100gm)
1 bottle of distilled water (500 gm)
1 spatula
1 color chart, range 4.0 to 8.0 pH in 0.5 pH steps
Complete with carrying case.

Additional Information:

• Delivery Time: 1week
• Packaging Details: cotton box

Product Details:

This is used for determination of in situ dry density of natural or compacted fine grained soil, free from aggregates. A cylindrical cutter is used to extract a sample of the soil with the help of a dolley and rammer. From the weight, density and the moisture, and dry density of the soil is readily calculated.

Specifications:

It consists one each of:

• Cylindrical core cutter made of steel, 127.3 mm long and 100 mm internal diameter
• Steel Dolley, 25 mm high with a lip to enable it to be located on top of the core cutter
• Rammer with detachable steel rod

Spare, Optional Extra and Accessories:

• Cylindrical core cutter 100 mm I.D. x 175 mm long
• Cylindrical core cutter 100 mm I.D. x 175 mm long
• Cylindrical core cutter 100 mm I.D. x 175 mm long
• Dolley
• Test form pad of 50

Field Density Kit  Manufacturer in Chennai, Field Density Kit Dealer in Chennai, Field Density Kit Shop in Chennai, Field Density Kit Supplier in Chennai, Field Density Kit Price in Chennai

 

 

 

Field Density Kit Manufacturer in Tamilnadu,  Field Density Kit Manufacturer in Chennai, Field Density Kit Manufacturer in Kanchipuram,  Field Density Kit Manufacturer in Tiruvallur, Field Density Kit Manufacturer in Cuddalore, Field Density Kit Manufacturer in  Villupuram, Field Density Kit Manufacturer in Vellore,  Field Density Kit Manufacturer in Tiruvannamalai, Field Density Kit Manufacturer in Salem,  Field Density Kit Manufacturer in Namakkal, Field Density Kit Manufacturer in Dharmapuri, Field Density Kit Manufacturer in Erode, Field Density Kit Manufacturer in Coimbatore, Field Density Kit Manufacturer in The Nilgiris, Field Density Kit Manufacturer in Thanjavur, Field Density Kit Manufacturer in Nagapattinam, Field Density Kit Manufacturer in Tiruvarur,  Field Density Kit Manufacturer in Tiruchirappalli, Field Density Kit Manufacturer in Karur, Field Density Kit Manufacturer in Perambalur, Field Density Kit Manufacturer in Pudukkottai, Field Density Kit Manufacturer in Madurai, Field Density Kit Manufacturer in Theni, Field Density Kit Manufacturer in Dindigul, Field Density Kit Manufacturer in Ramanathapuram, Field Density Kit Manufacturer in Virudhunagar, Field Density Kit Manufacturer in Sivagangai, Field Density Kit Manufacturer in Tirunelveli, Field Density Kit Manufacturer in Thoothukkudi, Field Density Kit Manufacturer in Kanniyakumari, Field Density Kit Manufacturer in Krishnagiri, Field Density Kit Manufacturer in Ariyalur, Field Density Kit Manufacturer in Tiruppur

Product Details:

With the valuable assistance of adroit team of professionals, we are offering a optimum quality Double Ring Infiltrometer. To manufacture this product, assured quality components are used by experienced professionals at our manufacturing unit. In addition to this, at the end of production, quality controllers stringently test this product on various parameters in adherence to industry standards. Also, it offers water filtration measurement without causing any damage to the turf. Customers can avail this product from us at affordable prices.

Features:

    No damage to turf
    Reliable readings
    Significant in water percolation

Applications:

Turfgrass Areas

•     Golf greens
•     Fairways
•     Golf tees
•     Sports fields
•     New construction
•     Lawns
•     Playgrounds
•     Research plots
•     Seed beds

Engineering Applications:

•     Drain Fields
•     Wetland assessment
•     Urban Runoff
•     Drainage basins
•     Retention ponds
•     Infiltration pits and systems
•     Percolation holes
•     Storm water planning
•     Storm water discharge
•     Site Planning

Specifications:

    Volume of inner ring: 3000 ml
    Diameter of outer ring: 60 cm
    Volume of outer ring: 10000 ml

Double Ring Soil Infiltrometer Manufacturer in Tamilnadu,  Double Ring Soil Infiltrometer Manufacturer in Chennai, Double Ring Soil Infiltrometer Manufacturer in Kanchipuram,  Double Ring Soil Infiltrometer Manufacturer in Tiruvallur, Double Ring Soil Infiltrometer Manufacturer in Cuddalore, Double Ring Soil Infiltrometer Manufacturer in  Villupuram, Double Ring Soil Infiltrometer Manufacturer in Vellore,  Double Ring Soil Infiltrometer Manufacturer in Tiruvannamalai, Double Ring Soil Infiltrometer Manufacturer in Salem,  Double Ring Soil Infiltrometer Manufacturer in Namakkal, Double Ring Soil Infiltrometer Manufacturer in Dharmapuri, Double Ring Soil Infiltrometer Manufacturer in Erode, Double Ring Soil Infiltrometer Manufacturer in Coimbatore, Double Ring Soil Infiltrometer Manufacturer in The Nilgiris, Double Ring Soil Infiltrometer Manufacturer in Thanjavur, Double Ring Soil Infiltrometer Manufacturer in Nagapattinam, Double Ring Soil Infiltrometer Manufacturer in Tiruvarur,  Double Ring Soil Infiltrometer Manufacturer in Tiruchirappalli, Double Ring Soil Infiltrometer Manufacturer in Karur, Double Ring Soil Infiltrometer Manufacturer in Perambalur, Double Ring Soil Infiltrometer Manufacturer in Pudukkottai, Double Ring Soil Infiltrometer Manufacturer in Madurai, Double Ring Soil Infiltrometer Manufacturer in Theni, Double Ring Soil Infiltrometer Manufacturer in Dindigul, Double Ring Soil Infiltrometer Manufacturer in Ramanathapuram, Double Ring Soil Infiltrometer Manufacturer in Virudhunagar, Double Ring Soil Infiltrometer Manufacturer in Sivagangai, Double Ring Soil Infiltrometer Manufacturer in Tirunelveli, Double Ring Soil Infiltrometer Manufacturer in Thoothukkudi, Double Ring Soil Infiltrometer Manufacturer in Kanniyakumari, Double Ring Soil Infiltrometer Manufacturer in Krishnagiri, Double Ring Soil Infiltrometer Manufacturer in Ariyalur, Double Ring Soil Infiltrometer Manufacturer in Tiruppur

Product Details:

Consists of Drive Weight, 65 kg, fitted with chain. Guide Pipe Assembly, fitted with a driving head on one side having standard "A" drill rod thread & a cap on the second side. Drive weight falls freely through a height of 75mm. Tripod stand,6 meter high connected by a tie bolt. Each leg is made of three part for easy transport. Complete with pulleys and stairing arrangements. Tripod stand 5 meter long Each leg is made of two parts. Complete with pulley & stirring arrangement. Pulley Spare. "A" Drill Rod 1 meter long. "A" Drill Rod 1.5 meter long. "A" Drill Rod 3 meter long. Sampling Auger D – 1452

Additional Information:

• Delivery Time: 2 week
• Packaging Details: cotton box

Product Details:

Sand Pouring Cylinder

Salient Features

• Specifications :The complete apparatus consists one each of: Small Sand Pouring cylinder, 3 litre capacity, fitted with conical funnel and shutter. Cylinder calibrating container, internal dia 10 cm and internal depth 15 cm, fitted with a flange, Metal tray, 30 cm. square and 4 cm deep with a 10 cm dia hole in the centre.
• 
  
  Accessories :
  Metal tray, 30 cm square and 4 cm deep without hole.
  Test forms pad of 50

Tag: Sand Pouring Cylinder Dealer in Chennai , Sand Pouring Cylinder manufacture in Chennai

Ariyalur, Sand Pouring Cylinder in Tiruppur

Field Density Apparatus Manufacturer in Chennai, Field Density Apparatus Dealer in Chennai, Field Density Apparatus Shop in Chennai, Field Density Apparatus Supplier in Chennai, Field Density Apparatus Price in Chennai

 

 

 

Field Density Apparatus Manufacturer in Tamilnadu, Field Density Apparatus Manufacturer in Chennai, Field Density Apparatus Manufacturer in Kanchipuram, Field Density Apparatus Manufacturer in Tiruvallur, Field Density Apparatus Manufacturer in Cuddalore, Field Density Apparatus Manufacturer in Villupuram, Field Density Apparatus Manufacturer in Vellore, Field Density Apparatus Manufacturer in Tiruvannamalai, Field Density Apparatus Manufacturer in Salem, Field Density Apparatus Manufacturer in Namakkal, Field Density Apparatus Manufacturer in Dharmapuri, Field Density Apparatus Manufacturer in Erode, Field Density Apparatus Manufacturer in Coimbatore, Field Density Apparatus Manufacturer in The Nilgiris, Field Density Apparatus Manufacturer in Thanjavur, Field Density Apparatus Manufacturer in Nagapattinam, Field Density Apparatus Manufacturer in Tiruvarur, Field Density Apparatus Manufacturer in Tiruchirappalli, Field Density Apparatus Manufacturer in Karur, Field Density Apparatus Manufacturer in Perambalur, Field Density Apparatus Manufacturer in Pudukkottai, Field Density Apparatus Manufacturer in Madurai, Field Density Apparatus Manufacturer in Theni, Field Density Apparatus Manufacturer in Dindigul, Field Density Apparatus Manufacturer in Ramanathapuram, Field Density Apparatus Manufacturer in Virudhunagar, Field Density Apparatus Manufacturer in Sivagangai, Field Density Apparatus Manufacturer in Tirunelveli, Field Density Apparatus Manufacturer in Thoothukkudi, Field Density Apparatus Manufacturer in Kanniyakumari, Field Density Apparatus Manufacturer in Krishnagiri, Field Density Apparatus Manufacturer in Ariyalur, Field Density Apparatus Manufacturer in Tiruppur

Product Details:

Remoulded Compacted soil, when soaked in water, absorbs water and swells. Swell test apparatus is designed to determine the swelling pressure developed by soil specimens moulded to desired densities at known moisture content.
Salient Features

• Specifications : The outfit comprises the following:
  One loading unit, hand operated 5 tons capacity with two rates of travel.
  One high sensitivity Proving Ring 250 kg. capacity with calibration chart and carrying case.
  One dial gauge 0.01 mm x 25 mm.
  One Gun Metal mould 1000ml. capacity. (100 mm dia x 127.3 mm high) with collar and base plate and a pair of porous stones 100 mm dia x 12.7 mm thick.
  One Gun metal /brass perforated swell plate 100 mm dia x 16 mm thick.
  One spacer 100 mm dia x 12.7 mm thick one load transfer bar and one steel ball.
  One soaking tank 250 mm dia x 210 mm high.

Additional Information:

• Delivery Time: 2 week

Product Details:

The unit provides a constant uniform shaking with automatic cycle test. Oscillating excursion is 200 mm at 175 strokes / minute rate. Complete with timer that automatically stops the shaker at the end of the test. Power Supply 230 V A.C. 50Hz.

Additional Information:

• Delivery Time: 2 week

Product Details:

This extractor frame is used for taking out soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as Core Cutters, Proctor moulds, c. B. R. Moulds etc.
Salient Features

• Specifications : It consists of a 5 Ton capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 100 mm dia and the other of 150 mm dia moulds are supplied. One thrust plate for 150 mm dia and one for 100 mm dia specimens are also supplied. Height of thrust plate is adjustable.
  
  Accessories : Set of Plungers adaptors and thrust plates for 38 mm, 50 mm and 75 mm dia specimen.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Used for testing rock, aggregate and core samples as well as out crop specimen in their original shape. Very useful for rock classification. This is a portable instrument and is useful in the field also. Uniaxial compressive strength for rock specimen can also be predicted approximately.
Salient Features

• Specifications : The instrument comprises of :- A three pillar type load frame on the base of which at the centre is fixed a 10 Tonne capacity hydraulic jack with a conical platen at the top of jack. The other conical platen is fixed to the top plate of the frame at its centre.The distance between two conical platen is fixed to the top plate of the frame at its centre. The distance between two conical platens is adjustable by vertical movement of the upper plate of the load frame. Loading jack with integral hand operated pump and a pressure gauge 0-2500 kg x 25 kg.
  Optional : Pressure gauge 0 - 10000 kg x 50 kg.

Additional Information:

• Delivery Time: 2 week
• Packaging Details: cotton box

Product Details:

This cone is used to find out viscosity of Bentinite slurry and like material. The Marsh Cone is 6 inch in diameter at the top and 12 inch long, and tapers to join a tube 2 inch long and 3/16 inch inside dia. The capacity of the funnel is 1500 cc. Time in seconds required to flow out 1000 cc of slurry from cone is measured as funnel viscosity of the material.

Additional Information:

• Delivery Time: immediate
• Packaging Details: cotton box

Product Details:

4 Plastic Measuring cylinders 1 Carrying case 1 Weighted foot assembly 1 Irrigator tube 1 Rubber tubing complete with pinch clip 1 Syphon assembly, with 5 litre polythene bottle 1 Funnel Accessories
a) Syphon Assembly,with 5 litre polythene bottle required. Supplied without rubber tubing
b) Calcium Chloride 2.5 kg
c) Formaldehyde, 40% solution, 2.5 litres
d) Glycerol Analar 2.5 kg

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Used for grain size analysis of soils where more than 10% of the material will pass through 75 microns I. S. Sieve. Manufactured from clear transperent glass having uniform clarity throughout the upper end on which density scale is engraved. The scale range is 0. 995 to 1. 030 density (gms/cc) at 27°c. Smallest division on the scale is 0.0005.
Note: hydrometer for other liquids also available.

Additional Information:

• Delivery Time: Immediate
• Packaging Details: cotton box

Product Details:

To determine moisture contents in soil and other material. These are made from aluminium or stainless steel.
Sizes available are :
(a) 25 mm dia
(b) 50 mm dia
(c) 75 mm dia
(d) 80 mm dia
(e) 100 mm dia.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of 3mm. dia.
Salient Features

• Specifications :The complete set consists of one each:- 1.Glass plate 20 cm x 15 cm having ground ends and one side frosted. 2.Brass or stainless steel rod 3 mm dia x 150 mm long. 3.Flexible spatula. 4.Set of 6 moisture containers. 5.Porcelaine basin 150 mm dia. 6.Plastic wash bottle 500ml.

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

Aluminum alloy approx. 90xmm x 20mm deep
- Weight - 38g
- complete with lid and numbered

Product Details:

Specifications:
Capacity:
- 5gmx5
- 10gmx5
- 20gmx5

Slotted Weight Set  Dealer in Madurai, Slotted Weight Set Supplier in Madurai, Slotted Weight Set Distributor in Madurai, Slotted Weight Set manufacturer in Madurai, Slotted Weight Set Price in Madurai, Slotted Weight Set in Madurai, Slotted Weight Set in Tamilnadu, Slotted Weight Set in India, Sokkia Price in Tamilnadu,

 

Slotted Weight Set supplier in Chennai, Slotted Weight Set Dealer in Chennai, Slotted Weight Set Distributor in Chennai, Slotted Weight Set Service in Chennai, Slotted Weight Set Dealer, Slotted Weight Set Supplier

Slotted Weight Set Manufacture in Tamilnadu, Slotted Weight Set Manufacture in Chennai, Slotted Weight Set Manufacture in Kanchipuram, Slotted Weight Set Manufacture in Tiruvallur, Slotted Weight Set Manufacture in Cuddalore, Slotted Weight Set Manufacture in Villupuram, Slotted Weight Set Manufacture in Vellore, Slotted Weight Set Manufacture in Tiruvannamalai, Slotted Weight Set Manufacture in Salem, Slotted Weight Set Manufacture in Namakkal, Slotted Weight Set Manufacture in Dharmapuri, Slotted Weight Set Manufacture in Erode, Slotted Weight Set Manufacture in Coimbatore, Slotted Weight Set Manufacture in The Nilgiris, Slotted Weight Set Manufacture in Thanjavur, Slotted Weight Set Manufacture in Nagapattinam, Slotted Weight Set Manufacture in Tiruvarur, Slotted Weight Set Manufacture in Tiruchirappalli, Slotted Weight Set Manufacture in Karur, Slotted Weight Set Manufacture in Perambalur, Slotted Weight Set Manufacture in Pudukkottai, Slotted Weight Set Manufacture in Madurai, Slotted Weight Set Manufacture in Theni, Slotted Weight Set Manufacture in Dindigul, Slotted Weight Set Manufacture in Ramanathapuram, Slotted Weight Set Manufacture in Virudhunagar, Slotted Weight Set Manufacture in Sivagangai, Slotted Weight Set Manufacture in Tirunelveli, Slotted Weight Set Manufacture in Thoothukkudi, Slotted Weight Set Manufacture in Kanniyakumari, Slotted Weight Set Manufacture in Krishnagiri, Slotted Weight Set Manufacture in Ariyalur, Slotted Weight Set Manufacture in Tiruppur

Additional Information:

• Delivery Time: Immediate
• Packaging Details: Box

Product Details:

Product Details:

SPECIFICATION
1.Electrical Hot Plate Suitable for max
2.Tem 250 Deg C with Top MS 12x18 inch
3.Plate with Thermo set Control

Hot Plate Manufacture in Chennai, Hot Plate Dealer in Chennai, Hot Plate Shop in Chennai, Hot Plate Supplier in Chennai, Hot Plate Price in Chennai

Hot Plate Manufacture in Tamilnadu, Hot Plate Manufacture in Chennai, Hot Plate Manufacture in Kanchipuram, Hot Plate Manufacture in Tiruvallur, Hot Plate Manufacture in Cuddalore, Hot Plate Manufacture in Villupuram, Hot Plate Manufacture in Vellore, Hot Plate Manufacture in Tiruvannamalai, Hot Plate Manufacture in Salem, Hot Plate Manufacture in Namakkal, Hot Plate Manufacture in Dharmapuri, Hot Plate Manufacture in Erode, Hot Plate Manufacture in Coimbatore, Hot Plate Manufacture in The Nilgiris, Hot Plate Manufacture in Thanjavur, Hot Plate Manufacture in Nagapattinam, Hot Plate Manufacture in Tiruvarur, Hot Plate Manufacture in Tiruchirappalli, Hot Plate Manufacture in Karur, Hot Plate Manufacture in Perambalur, Hot Plate Manufacture in Pudukkottai, Hot Plate Manufacture in Madurai, Hot Plate Manufacture in Theni, Hot Plate Manufacture in Dindigul, Hot Plate Manufacture in Ramanathapuram, Hot Plate Manufacture in Virudhunagar, Hot Plate Manufacture in Sivagangai, Hot Plate Manufacture in Tirunelveli, Hot Plate Manufacture in Thoothukkudi, Hot Plate Manufacture in Kanniyakumari, Hot Plate Manufacture in Krishnagiri, Hot Plate Manufacture in Ariyalur, Hot Plate Manufacture in Tiruppur

Additional Information:

• Delivery Time: 1 week
• Packaging Details: cotton box

Product Details:

This is for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. In the test procedure a steel plate is subjected to gradually increasing load and settlements of the plates recorded. Maximum bearing capacity is noted as that load at which the plate starts sinking rapidly.
Specifications: the basic outfit consists of : 50 tonne hydraulic jack with separate pumping unit fixed to it a 0-500 KN. X 0. 5 KN. Pressure gauge and flexible metal pipe 5mtr. long - 1 no. Special ball and socket arrangement between the jack and the bearing plate - 1 no. Extension rod 12MM. dia x 25cm long for taking dial gauge readings - 16 nos. Magnetic base with female thread on top for holding extension rod - 4 nos. Top end plate, 50mm, dia with male thread for fitting onto the extension rods and positioning the dial gauge plunger - 4 nos. Column 15cm dia x 25cm long with flanges complete with four bolts and nuts - 2 nos. Column 15cm x 50cm long with flanges complete with four bolts and nuts - 1 nos. Bridge support of welded steel angle construction, 5 mtr. span and stands approximately 30cm, high, fitted with two quick release clamps after positioning and holding the dial bracket - 2 nos. Plane M.S. Plate 60 cms x 60cms sq. X 25mm thick. Plane M. S. plate 45cms x 45cm. Sq. X 25mm thick. Plane M. S. Plate 30cms x 30cm. Sq. X 25mm thick. Dial Gauge 0.01mm x 25MM - 4 nos.
Salient Features

• Accessories : Plane M.S. Plate 75cm x 25mm thick. Plane M.S.Plate 50cm x 25mm thick. Grooved M.S. Plate 60cm. x 60 cm. x 25mm thick. Grooved M.S. Plate 45cm x 45cm x 25mm thick. Grooved M.S. Plate 30 cm x 30cm x 25mm thick. Grooved M.S. Plate 75cm x 75cm x 25mm thick.
  Note: 1. When plates of size more than 30 cm.sq. are used, in order to prevent deflections of the edge, a series of smaller plates are advised to be placed concentrically on the bottom plate.
  2. Flexible rubber pipe 1 mtr. length can be supplied for the hydraulic jack in the place of metal pipe at extra cost. For site testing load trusses to meet the reaction of loading are available in different capacities as under.

Additional Information:

• Delivery Time: 2 week
• Packaging Details: cotton box